The Petwa PRO Series Commercial RO System
Removes up to 99% of the total dissolved solids (TDS) in raw commercial feedwater, producing high quality process water for:
• BOILER FEED
• DRINKING WATER
• FOOD and BEVERAGE processing
• HUMIDIFICATION SYSTEMS
• INDUSTRIAL PROCESSES
• SPOT FREE RINSE!
Features:
Membrane: advanced thin film composite for maximum rejection of impurities
Membrane Housings: standard stainless steel housings for PRO-150, PRO-300, PRO-450. Standard PVC housings for PRO-600, PRO-1200 and PRO-1800 (stainless steel optional)
Process Pump: direct coupled brass rotary vane type designed for continuous high pressure service
Frame: corrosion resistant powder coated steel
Pre-Sediment Filter: 5 micron rated filter for removal of sediment and protection of system
Pre-Carbon Filter: granular activated radial flow carbon filter for removal of chlorine must be replaced regularly
Flow Meters: precise monitoring of operating conditions with three flow meters for product, waste and recycle streams (PRO-600/1200/1800 only)
Control Box: NEMA 12X rated control box with on/off switch and mode indicating lights (PRO-600/1200/1800 only)
Pre-Filter Isolation Valve: convenient shut off valve for easy filter replacement
Pressure Gauges: high quality 2.5" liquid filled process pressure gauge for monitoring operating pressure. 1" dry pressure gauge's for monitoring filter operation
Low Pressure Cut-Out: insufficient feed water will automatically shut the system down protecting the process pump
Tank Full Switch: RO system will automatically start when tank pressure falls below 30 psi and stop when pressure reaches 50 psi
Air Purge: system automatically purges air out of pump and membranes before start up (PRO-600/1200/1800 only)
Simple Maintenance/Inspection: all PRO Series components are strategically located on the frame for easy access and inspection
Return to Products Page